900MHz UltraSPARC III Cu Module X7009A

Sun X7009A

The X7009A is a 900MHz UltraSPARC III Cu Module manufactured by Sun Microsystems. We gathered information from several on-line sources and complied it here. We hope you find it helpful. If you have any more useful information about this product, please let us know so we can add it to this site.

Compatibilities:

All Sun Microsystems parts are known by at least two numbers, the X-Option number and the Part number. The best way to find out what part you have is the BarCode. Every part that Sun Microsystems sells has a Sun bar-code. This bar-code has both the part number and serial number of the part. (The X-Option number is not located on the part.) Here is a sample Sun Barcode:

An X-Option may have multiple part numbers and a part number may have multiple X-Option numbers associated with it.

Need help finding out what part you have? Enter your part number here to search our database

Here are the X-Option numbers and Part numbers associated with the X1034A:

X-Options: X7009A

Part Numbers:

Note: Sun Fire 280R requires Fan Tray 540-5088
(see Notes below).

Sun X7009A

Notes:

1. The minimum Sun Blade 1000 and Sun Fire 280R OS is Solaris 8 10/01.
2. The Netra 20, Sun Blade 1000 and Sun Fire 280R require OBP >= 4.4 Version 6.
3. The Sun Blade 2000 requires Solaris >= 8 2/02 with Patches 109815 , 109888 , and 111874 and OBP >= 4.5 Version 10.
4. The Sun Blade 1000 system board supports mixed module speeds if the UltraSPARC III frequency is a whole number multiple of 150MHz.
5. Mixing module speeds in the Sun Fire 280R is not supported.
6. Mixing module speeds in the Netra 20 is not supported.
7. Mixing UltraSPARC III and UltraSPARC III Cu is not supported.
8. If only one CPU module is installed, it must be in Slot 0, and Slot 1 should be covered with a CPU Shroud Cover.
9. Sun Fire 280R systems need Fan Tray X9820A (540-5088) to support 501-6002.
   Systems built and shipped after December 4, 2001, will include the fan tray.
10. Use torque tool 340-6091 or 340-6395 to install this module.
    Both are calibrated to 5.0 +/- 0.5 in/lbs (.565 Nm).
11. A torque tool is included with systems that use this module.

Where to buy:

Documentation:

Sun Blade 1000 Service Manual , 805-4496

Sun Blade 1000 and Sun Blade 2000 Service Manual , 816-3217.

Netra 20 Service and System Reference Manual , 806-7336.

Sun Fire 280R Service Manual , 806-4807.

Sun Fire 280R Server: UltraSPARC III Cu CPU Module Installation Guide , 816-2726.

Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu CPU Module Installation Guide , 816-3221.